January 12, 2008

Vista: a near miss

I'm not totally happy with PowerDVD Ultra (aka PowerDVD 7) and have been considering reinstalling PowerDVD 6 in parallel. Tonight I tried it.

So I told PowerDVD 6 to install in a different directory. But it no longer worked; playing a DVD made it lock up cold. So I tried running PowerDVD 7 again -- and it told me it couldn't play the disk to the external monitor because of DRM limitations. Which was peculiar because it was just a standard DVD, and I don't have an external monitor.

Obviously PowerDVD 6 had laid on top of some of the critical PowerDVD 7 stuff, so it had to go. And I then discovered that there was no uninstall icon for it in the Control Panel "programs" pane. But in the shortcut directory for it there was an uninstall shortcut -- which didn't work.

Oh, no.

I ended up uninstalling PowerDVD 7 and then reinstalling it, a multistep process because there was a patch file to install, but fortunately it worked afterwards. I've got the chickenhead icon back on my desktop and it works fine with the DVD it complained about earlier.

Interestingly, uninstalling PowerDVD 7 also uninstalled PowerDVD 6. Isn't that curious?

But it means I'm going to have to put up with the things about it I don't like. The main problem is that the single step is even worse than before, and it doesn't handle the "step backwards" function well at all. If you step back two or three keyframes and then start playing, the video doesn't work. You get a frame update about once a second. I've found that the only way to recover from that is to use the "go backwards 10 seconds" key (PgDn), which rather defeats the purpose.

Those things, plus a few others, make getting frame grabs even more of a pain than before. But at least it does work. Whew!

There has got to be a decent player program out there, and I don't mean VLC. But my experience with WinDVD was even worse and I'm not willing to spend more money on them, and I don't think there are any other commercial products. And I don't want to muck around with Vista's Media Center, even though it does play DVDs. I tried it, and it was horrible.

Them's the breaks. If I can't get my frame grabs any other way, I can temporarily rip the DVD and get clean grabs using Vidomi and ThumbsPlus. Crude, but it works.

Ah, life is hard, you know?

Posted by: Steven Den Beste in Computers at 12:14 AM | Comments (10) | Add Comment
Post contains 427 words, total size 2 kb.

December 17, 2007

Vista: Upgrade available

This post (via) is nicely sarcastic and well handled, but it makes an interesting point: for a lot of people, XP is better than Vista. Microsoft wants to shut XP down, but its customers won't let it. They've already extended the support period for XP once, and I doubt that'll be the last time.

I don't myself regret switching. I could install XP on this machine (and I'm sure I could find drivers for all the things I care about) but I don't really care to do so. Mostly Vista hasn't been a problem.

The seriously degraded backup ability was certainly an unpleasant surprise. Looks like I'll probably have to spend $50 for a third-party solution. (Hooray! Something that isn't from Symantec! Thanks, Bob!)

And there have been pleasant little surprises. One is the fact that fav-ico's no longer show up in my favorites list in IE7. I hate those. HATE HATE HATE those.

They show up in the "current site" bar when I'm browsing, which is fine. But they never show up anymore in shortcut icons anywhere, on the desktop or in folders or in the favorites list. I don't know if that's universal experience. I have a couple of Proxomitron rules which try to prevent access to things named fav.ico, but under XP they'd sometimes slip in anyway.

What I know is that they're no longer bedevilling me.

I know that doesn't sound like a big thing, but in fact most of the differences between XP and Vista in terms of use experience for me have been little things. They're just stuff you have to learn to live with, and most of them can be ameliorated. The others don't happen often enough to really become an annoyance.

The big thing that article mentions as a difference between XP and Vista is a claim that XP feels faster on a particular piece of hardware. I really have no way of testing that. My old notebook has much slower hardware, and XP. The new one has only ever run Vista. But it is fast and responsive, and that article notwithstanding I don't suffer from any 60-second lockups that I've noticed. Whether that's because Vista's speed deficit is being compensated for by triple the CPU power, I couldn't say.

And it must be said, this is really cool:

I don't use it, but it's really cool.

Posted by: Steven Den Beste in Computers at 04:57 PM | Comments (13) | Add Comment
Post contains 398 words, total size 3 kb.

December 16, 2007

Vista: backups?

Last night I decided it was time to do a backup, so I searched for the backup tool I'm familiar with from XP, which permits me to control which directories are saved.

Well, I didn't find it. In the control panel there was a backup tool, but it scared me. I didn't get very far into its menus, because it wanted to backup everything to one of my external drives, and that means about 145 gigabytes. It seemed like it was going to give me the choice to backup or not backup different kinds of media types, but all-or-nothing on pictures is not really the right answer here. Some pictures are part of the operating code of utilities I want to back up, and some of them are "art" (ahem).

I understand what happened. The old backup program was intimidating to people who don't know anything about computers. The new interface reduces the number of choices -- but I want lots of choices. Anyone know if it's possible to get the old UI back? Or is the old backup program available, perhaps to be directly invoked? (I couldn't find anything that looked like it in the startup folder.)

UPDATE: It occurred to me a few minutes ago that the old backup program might still be out there, but that it might be something like perfmon or regedit that didn't have an icon in the normal start menu. So I fired up my old laptop and found out that the backup program is C:\windows\System32\ntbackup.exe.

Unfortunately, there is no such program on my Vista machine. Think it would be safe, and effective, to copy the XP backup program over to Vista and use it? Unfortunately, given the things they've done to the registry, I'm afraid it wouldn't work. It might give me the ability to choose directories and make a compressed archive of them, but it wouldn't store the system state.

I think my only hope is to see if Microsoft has provided a more flexible (i.e. more confusing and less friendly) backup program for Vista that I can download. Unfortunately, what I suspect is that the only way to get that is to upgrade my current "Vista Home Premium" to "Vista Home Ultimate" or to one of the Vista Professional versions.

Most likely the latter. There's an upgrade mechanism, essentially a Microsoft advertisement, which offers an "upgrade comparison chart". One of the features it lists is a "complete backup and restore" -- which is what I thought I already had, and what I don't want.

UPDATE: It doesn't look good. It seems that eliminating that ability was a deliberate design choice. I'm beginning to fear that I'll actually have to purchase something to do what I want.

The Ars Technica thread confirms: it's possible to copy NTBackup to Vista, and to use it to do selective file and directory backups, but it won't save the system state. So effectively I can use it to backup everything except the operating system. And it turns out that the backup mechanism they replaced it with also doesn't backup the operating system, unless I upgrade to "Ultimate", at a cost of $159.

Which stinks.

I understand that a simplified fully-automated backup was a good thing for a consumer product. But ripping out the full-featured backup was not a good thing. There's no excuse for not having both of them.

UPDATE: Fancy talk about "appropriate tools for our core customer base" notwithstanding, it looks like this is a licensing issue. NTBackup was licensed from Veritas, which was acquired by Symantec after XP was released.

I bet Symantec wanted more money for upgrading it and licensing it than Microsoft was willing to pay.

UPDATE: Anyone know anything about Symantec Norton Save & Restore V2.0? Apparently it permits folder-level selection, and it claims to be able to back up the system state.

I wish there were another answer. For one thing, this is more expensive than it really ought to be. (It really ought to be included in the operating system...) For another, Symantec products have long since left a bad taste in my mouth and I'd rather not have anything to do with them.

Posted by: Steven Den Beste in Computers at 08:00 AM | Comments (6) | Add Comment
Post contains 699 words, total size 4 kb.

December 11, 2007

Poser 7

So it was delivered today, about noon. I knew it was coming from the UPS track, but I thought I'd get it about 6 PM. I mentioned that to the UPS man, and he said this wasn't part of his normal route; they added it, presumably because the truck that serves this area was overloaded. (Maybe they even run extra routes during December, for all I know.)

Anyway, it loaded, and it runs. I spent about an hour messing with it.

1. It doesn't use a kludgey driver hack any longer. Thank goodness, and good riddance.

2. There are a lot of figures included in it. Each new generation includes a new man, a new woman, a new boy, and a new girl; that I was expecting. But there were at least 20 other figures include -- most of which were hideous, but still...

One of the new figures is a fully articulated octopus, and let's not go there.

3. The Poser 7 woman has a lot of polys. Yikes! Put it into facet mode and look from a distance, and there are so many lines you can't differentiate them.

4. The interactive mode uses OpenGL now, and on this machine that really screams. I didn't have that before, for whatever reason, so I was used to rotates of complicated scenes happening at about 2 frames per second. On this system it's so smooth I can't even guess what the frame rate is. "Fast enough", pretty much.

5. It's been more than two years since I last used it, but I can feel the old habits and lessons coming back really rapidly. They haven't changed the UI radically, though they have modified it some.

I haven't installed Shade yet; I'll wait a couple of days.

And I haven't yet answered the big question: does the program know how to minimize when doing a big render, or does it insist on believing that it's the only program running on the computer and force itself to stay displayed? Based on all the other cleanup I've seen, I would guess that's another thing they've fixed, but only experimentation will prove it.

I have confidence, however. The fact that the driver hack is gone means they've pretty much rewritten the foundation of the OS interface code, and that problem was another aspect of the same crap which is probably now completely replaced.

UPDATE: OK, as to the fast display rate in the preview, it comes and it goes. Sometimes it's blazingly fast, and sometimes it's 3 frames per second on exactly the same scene.

Once I was watching it while it was slow, and then suddenly something changed it and was really fast and responsive again.

When it renders, it does seem to be possible to minimize it, but you have to wait until it's done all its setup and then hit the window's minimize button. If you use the "show desktop" Windows icon, then all of it goes away but some of it comes back again.

They've added two new lighting modes. In addition to "spot" and "infinite" there's now "point" and some other with a strange name that I haven't messed with yet. The "point" is what you'd use if you want to make a candle flame light a scene; it sends light out in all directions. Much wanted, much needed.

Posted by: Steven Den Beste in Computers at 07:02 PM | Comments (3) | Add Comment
Post contains 561 words, total size 3 kb.

December 01, 2007

Vista: HD backdoor, sort of

The documentation for the latest version of PowerDVD says that the frame-grab function is disabled when you're playing HD-DVD or Bluray. Almost certainly that's due to licensing issues.

And it may not matter. I don't know if this is a Vista thing, or a change in the new version of PowerDVD, but even when you're using hardware acceleration, if the player is on any part, or all, of the screen and you use the OS-level "grab a copy of the screen" function (i.e. the "Print Screen" button, with or without the ALT shift) it actually gets a copy of the video being played. Here's what ALT-PrtScr grabs when the player is default size:

Now if you did this with the previous version of PowerDVD with XP, you didn't see any material in the display window. They were using a graphics mode where the image was inserted by the display chip. All the OS saw in there was a constant-color rectangle, which was being used essentially for "chroma-key".

That also meant that if you grabbed the window and moved it around, the material kind of lagged. It didn't move cleanly.

But now, it looks like a draggable window. Hardware acceleration is being used, but the graphics output is being handed back to the OS, and then to the app, and it's actually part of the window as far as Vista is concerned. When you move the window around, the material moves with the rest of the window. There's no lag. And it also means that if you do a screen grab using Vista's mechanism, that gets the material too. As far as Vista is concerned, it's all just pixels.

I see no reason why that wouldn't also be the case if you were playing an HD-DVD or Bluray, though of course there's no real way of knowing without trying it. But if this is true, then disabling the frame-grab button on PowerDVD for high density disks is even more stupid.

UPDATE: Interesting. Seems that frame grab isn't the only thing disabled for high density disks. Cyberlink has a proprietary frame enhancement algorithm called CLEV-II, and that is also disabled for high density disks. I wonder what else is? I'll have to skim through the documentation and see.

UPDATE: The only other thing disabled for high density disks is this:

CLPV (CyberLink Pano Vision) is a non-linear video stretching technology that produces minimal distortion in the center of the picture.

Which is small loss.

The features which are disabled are only enabled for regular DVDs if you disable all hardware acceleration. I bet the reason they can't be used for high density disks is because some of the DRM is implemented in the drivers. I bet you have to use at least some hardware acceleration for high density disks, and that the data needed for these features is downstream from there, and thus not available to PowerDVD to massage.

Posted by: Steven Den Beste in Computers at 05:57 PM | No Comments | Add Comment
Post contains 492 words, total size 3 kb.

November 30, 2007

PowerDVD Ultra full screen

When you put the playback into full screen mode, it doesn't louse up the aspect ratio. (That's a configurable parameter; it can be made to do so, but I'm not sure why anyone would want to.)

On this machine, it means I'm playing back normal DVDs onto a 1920*1200 display, of which it's using 1600*1200. There's a bar that appears on the bottom of the screen when you move the mouse that has all the player controls on it, and a few seconds after you stop doing things it vanishes again.

So that means it's a 2.5:1 linear stretch going from a nominal 640*480 to 1600*1200, or 6.25 times the pixels. Some frame grabs below the fold. 

more...

Posted by: Steven Den Beste in Computers at 10:57 PM | Comments (1) | Add Comment
Post contains 286 words, total size 2 kb.

Blitheringly stupid, but hardly surprising

The documentation for PowerDVD Ultra says that the "frame grab" function is disabled for HD-DVD and Blu-Ray discs.

Somehow I should have known that would be the case.

UPDATE: On the "good news" front, CyberLink's registration confirmation email was HTML-encoded, and now I know that even version 4.2 of Agent does not try to interpret HTML-encoded emails.

On the "bad news" front, PowerDVD still nags me to register, even though I've done it twice now, once with administration privileges.

Back to "good news", RTVReco still successfully pushes the "remind me later" button automatically. But it shouldn't be needed. I need to go see if there is a PowerDVD patch.

UPDATE: No, the latest patch doesn't fix the re-registration issue. Thank goodness for RTVReco. It's one of those tiny, old, ridiculous utilities which I simply cannot live without.

Just to give you some idea of just how old it is, the name is short for "RTV Reconnect", and it was written by someone with initials "RTV" to push the "reconnect" command button for his modem dialup program. Then he generalized it a bit and started selling it as shareware.

I paid for it, but lost my password somewhere back there, so I got online one time, maybe five years ago, and found a pirate site that had a password that worked. (I don't feel guilty about that.)

It's the Windows version of a concept I first ran into on the Amiga. There, the equivalent program was called GOMF (for "Get out of my face") and that one was written by someone on the AmigaOS development team.

UPDATE: The patch for PowerDVD changed its icon. I dunno what they think that's supposed to be, but to me it looks like a chicken head.

Posted by: Steven Den Beste in Computers at 05:33 PM | Comments (5) | Add Comment
Post contains 296 words, total size 2 kb.

November 29, 2007

Vista: software upgrades

There's a fair amount of bitching and moaning out there about Vista as an upgrade from XP. I confess that I fell for some of the FUD. It's turned out to be much less of a problem than I thought it would be, though there has been a bit of adaptation needed.

One thing I was a bit afraid about was that some of my software would have to be upgraded, and that's the case. Tomorrow UPS will deliver the latest version of PowerDVD, for instance.

The previous version works, but the "registration" mechanism doesn't quite. The problem is that it's trying to make a change to the registry, and in Vista some parts of the registry are locked down. So, the obvious idea was to try running PowerDVD as administrator so it could, right? Problem with that is that it then makes those changes somewhere else than it was trying to when it wasn't administrator, which means that when you run it as non-administrator it once again begs you to register.

"RTVReco" is one of those little utilities without which using any Microsoft OS would be far more painful. It is a bitty utility that sits in the tray, and you can program it to automatically push buttons on nag popups. Right now I've got it set to push the "register later" button on the PowerDVD registration popup. But I hope that the new version, arriving tomorrow, which was developed after Vista was released, won't cause me that kind of grief.

A bigger problem has been email. For the longest time I've been using V1.9 of Agent, a fine program but a very, very old version. Why haven't I upgraded? First, because there was no compelling reason to. It worked fine. Second, because there was a compelling reason not to: later versions of Agent supported HTML-encoded email, and HTML-encoded email is evil. And dangerous.

But it turns out that I can't get Agent to work under Vista. It'll run, but it goes 100% CPU bound trying to read in the saved mail databases. My guess is that whatever database library that ancient version of Agent used was deprecated, and has been dropped entirely in Vista -- except that can't be right, because I'd get a runtime error.

I don't know what it is. For the moment, I'm running Agent on the older laptop, which I turn on about once a day to check my email. I want my email on the new machine, however, and that means I need something new. (Note: it doesn't mean I want lots of suggestions for things I "might want to consider".) If I have to get a newer program, I may as well spring for the latest version of Agent instead of looking for something else, for the simple reason that an Agent upgrade installed on the older laptop should be able to read in and upgrade the old database files, and then it should be possible for me to transfer the whole kit-and-kaboodle over to Vista. If I switch to any other mail program, (no matter how emphatically someone else vouches for it) then I have a clean email break with the past, which is very inconvenient. So I guess that's what I'm going to have to do. And I'll just have to be careful about poisonous HTML-encoded email -- or hope that by now the guys developing Agent have fixed the major security holes that spammers have been using.

UPDATE: And by gum, V4.2 updated the older database, and works beautifully on Vista. Even better, looking at older HTML-encoded email I've received before, it doesn't display it that way. But perhaps new stuff which is HTML-encoded will indeed display with markups. I guess I can only wait until I receive something like that in order to check it.

I haven't really lookd around yet, but I bet it's something you can turn on and off. I'm not the only person who is paranoid about it.

UPDATE: Speaking of software upgrades, the hell-and-gone long time ago I ended up with a copy of Office 95, included with a computer I bought. It was a full version, not locked to that particular machine. Two or three computers later, I eventually bought upgrades for most of the parts I needed. But installation of the sucker is a pain; you have to install Office 95, and then do all the upgrades, and all the upgrades want to phone home in order to activate, and Microsoft counts the total number of times you've done this -- even if it's less than once per year. On my most recent laptop I didn't bother installing any of it except for FrontPage, which I actually needed.

But occasionally I'd want Excel. I'm not a heavy spreadsheet user, but there are things they're nice for, and I'd feel a slight twinge once in a while -- and then decide not to bother.

This new machine came with a trial version of the latest version of Office. It's all installed here, but if you activate it works for 60 days, and then wants you to fork over a pile of money (a couple hundred bucks, I think) to MS in order to keep using it. If I really were a big-time heavy user of Office, I'd probably grit my teeth and pay, but fact is, I'm not.

So I downloaded OpenOffice for free. Their version of Excel is called "Calc", and it opened a spreadsheet I downloaded from the web just fine. That spreadsheet was just data; it didn't have any functions built in, but that's OK. For my purposes Calc should be just fine.

So sometime, when I don't have anything better to do, I should probably go and tell the Office demo package to uninstall itself. There's a pile of disk space going to waste right now holding stuff I don't want, and it'll get rid of registry stuff that wants to make Office the default tools for a lot of things. At least once already I clicked something and the Office demo "Do you want to try Office for free for 60 days?" popup got into my face. (Or maybe that's not an issue any more. OpenOffice makes itself the default tool for most stuff, and now Agent hopefully has superseded Outlook as the default tool for email.)

UPDATE: Another old program that doesn't quite work is Encarta 2001. Actually, it does work, it's just that you can't install Encarta Encyclopedia on the hard drive. The installation works, but the program refuses to believe that it's happened. I'm sure this is another case of the program trying to use a section of the registry it's no longer permitted to use, and nothing I could figure out to try in terms of using administrator privilege could fix it.

However, these days with Wikipedia being as good as it has become, I simply don't need Encarta Encyclopedia any longer. And Encarta Dictionary and Encarta World Atlas, which I do use routinely, both installed just fine.

I miss having Streets and Trips, however. That also wouldn't install, and I probably ought to grit my teeth and buy a new version. (My version was 2001, and it isn't all that expensive IIRC.)

Lessee... another old program that wouldn't work was Poser 5 -- but that's not surprising; Poser 5 had a gawdawful hack that shouldn't have been permitted to work at all. In XP it only worked as administrator. In Vista it isn't permitted to do what it's trying to do. So some time, when I am not feeling quite as financially drained, I'll buy the latest version of Poser, which no longer uses that gawdawful hack. And maybe, if we're lucky, also knows how to play nicely in an environment where other programs are running at the same time, and can and will minimize itself cleanly when doing a long render.

Posted by: Steven Den Beste in Computers at 09:31 PM | Comments (7) | Add Comment
Post contains 1323 words, total size 8 kb.

November 25, 2007

Vista: This isn't supposed to be happening!

What in hell is this?

Every few seconds, my HD has been going totally saturated for a couple of seconds, and everything else comes to a screeching halt.

Fuck; it's almost like the stupid background indexer has somehow turned itself back on again. But I'm sure I've got that sucker disabled.

As I'm typing this, whatever-the-hell it was has stopped. That scares me, too. I don't like problems which spontaneously disappear, because they have a tendency to spontaneously reappear.

UPDATE: I love "Thumbs Plus". My current version is 7.0. There are newer versions, and it looks like I may need to upgrade in order to use it with Vista.

Actually, v7.0 works fine -- but when I close it, it leaves an eternal process running, anything from 13 to 18 megabytes. I just tried running it and closing it four times in succession, and ended up with 4 eternal processes. I can kill them manually with the task manager, but I shouldn't have to.

I'm willing to bet I know what the problem is. When Thumbs Plus is trying to shut down, it's trying to write info about the session into the registry, and it's trying to use a section which the nifty new, improved Vista security wont let it use. As a result, I bet the program is stuck in a retry loop.

Meanwhile, whatever that damned thing that was hammering my HD periodically, has started again. This scares me.

UPDATE: Turns out that V7 of Thumbs Plus is the most recent major version. However, there's an update dated 20071025, which I'm downloading now. With any luck, he'll have addressed this problem.

UPDATE: Whatever the problem was that left Thumbs Plus processes running forever, the patch fixed it.

Posted by: Steven Den Beste in Computers at 07:37 PM | Comments (14) | Add Comment
Post contains 296 words, total size 2 kb.

November 20, 2007

Vista: HD-DVD

The spec sheet for this computer says, under "optical drive":

DVD Super-Multi/ DVD Super-Multi Light Scribe/HD-DVD/Blu-ray

It didn't occur to me until just now that this was a multiple choice list. I thought my optical drive was capable of reading HD-DVD and Blu-ray.

I was just over at the grocery/variety store, stocking up on food for the weekend and trying to get there before the army ants descend and strip the place bare tomorrow, and while I was there I visited the video section and decided to pick up something high resolution.

That's because I just ordered the latest version of PowerDVD, which includes codecs for HD-DVD and Blu-ray.

So I bought a copy of "Planet Earth" for $75. I recall seeing something from Fledge saying it was outstanding.

I don't have the new program yet, but I was curious to see whether the Windows Media Center would work with it, and even if it did not I could at least look at it as if it were a data disk and see how much was on it.

The drive acted the way an old CD drive used to act with a DVD: it constantly reseeked and never really spun up. Obviously it didn't understand the format.

So I went back and looked at the spec sheet more carefully. The listing above for optical drive is, in fact, multiple choice. The individual variants come with different optical drives.

My machine is a "G2S-B1". Of the four models, the "Extreme" has a Blu-ray drive, and the other three are listed as having a "Super Multi w LS". "LS" means "Light Scribe", one of the most silly and utterly useless drive features you'd go a long way to avoid paying for. But that also means that this drive doesn't actually understand high density disks. Bummer.

Posted by: Steven Den Beste in Computers at 06:17 PM | Comments (7) | Add Comment
Post contains 305 words, total size 2 kb.

<< Page 29 of 32 >>
85kb generated in CPU 0.0395, elapsed 0.0992 seconds.
47 queries taking 0.0797 seconds, 143 records returned.
Powered by Minx 1.1.6c-pink.