November 09, 2010

Slate update -- form letter

HP just sent me an email:

Dear DEN BESTE STEVEN,

Hewlett Packard would like to thank you for choosing us as your mobile computer vendor.  Due to high demand on the portable system you have selected we will not be able to fulfill the order from on hand stock, therefore we have routed your order to manufacturing for your product to be built.

The average lead time to get these portables ready to ship may vary from 10 to 15 business days.

That smells of "form letter".

The order status page for my order hasn't changed, so I don't know what's going on. I had hoped I'd have the Slate before Thanksgiving, but now I wonder if I'll even get it before Christmas.

Posted by: Steven Den Beste in Computers at 09:19 AM | Comments (16) | Add Comment
Post contains 128 words, total size 1 kb.

1 Of course it's a form letter. In fact, "Dear DEN BESTE STEVEN" is an oxymoron. If you, or their customers in general, were the slightest bit dear to HP, they would at least make sure that their mail merge wasn't fouling up people's names in email salutations. It's amazing how many people think that customer service and polish don't matter in the Internet age.

Posted by: AlexG at November 09, 2010 10:17 AM (0VvtC)

2

It isn't even a form letter they composed specifically about the Slate. It looks to be a standard form letter they've been using for years.

Ah, I tell you, Hewlett and Packard must be rolling over in their graves. The company they founded isn't even named after them anymore.

I worked for Tektronix between 1976 and 1982, and back then HP and Tek were major competitors in a whole lot of high tech areas. It was something of a truism that if in any market both HP and Tek competed, there wasn't a lot of room left for anyone else, and none of the customers cared.

I remember that in one of Tek's annual reports, they made a comment that Tek was blessed with having a superb competitor -- and I know I felt that way, during my years in the Logic Analyzers group. HP brought out the best in us, and I don't doubt we did the same to them. (Especially since we went from #3 in sales in that market to #1 during my years there, mwaahaahaaa.)

But that was the HP that Hewlett and Packard founded, the legendary Test and Measurement business. Carly Fiorina spun that off when she decided to make HP into a computer company.

Why, oh why, didn't she use the "Compaq" brand name for her computer company, and leave "Hewlett Packard" for the T&M business? (sob)

Posted by: Steven Den Beste at November 09, 2010 12:57 PM (+rSRq)

3 I had a Compaq desktop in college, and the name "Compaq" will forever say, to me, "adequate for end users but not great." My current company-supplied laptop is a HP and I hate it, primarily for its incredibly buggy "QuickLaunch" touch buttons. Honestly, the only PC maker with whom I've had a genuinely good (as opposed to merely bearable) experience is *cough* Apple. Eheh.

Posted by: AlexG at November 09, 2010 01:20 PM (0VvtC)

4 IBM used to have quite a reputation for quality among their laptops, but I don't know if Lenovo is still known for that.

Posted by: Steven Den Beste at November 09, 2010 02:45 PM (+rSRq)

5 There was a good reason why customers didn't care--nobody else came close to matching the quality of those products.  At approximately the same time you worked for Tek, I worked for Boeing Electronics (back when that company still made stuff, sob!).  We used HP for power supplies and frequency generators, and Tek for scopes and logic analyzers.  An HP1000 formed the backbone for our automated test station.  Neither the 757 nor the 767 could ever have flown without the support of that equipment. 

Posted by: go-daigo at November 09, 2010 05:32 PM (9Oj3y)

6 I love HP and Tek gear of that era.  My dad worked for a big engineering firm at the time, and while they didn't exactly let me play with stuff, I did get to spend a day with an HP 9845 workstation.  Ah, those were the days...

Posted by: Pixy Misa at November 09, 2010 06:31 PM (PiXy!)

7 My personal timeline for the downfall of HP begins in 1994, when they released the first HP printer that sucked (the original Color LaserJet). By the time they introduced the PhotoSmart printer in 1997 that made water-soluble 4x6 prints, it was all over.

(seriously, you could lick the ink off of someone's photos weeks after they were printed)

-j

Posted by: J Greely at November 09, 2010 06:59 PM (fpXGN)

8 I hate the nipple, so I hate my T400. But it was "free" (company buy). I'm so going back to Dell when I'm done with this.

Posted by: Pete Zaitcev at November 09, 2010 07:27 PM (DTMuE)

9 Even today HP make good stuff.  I still have my LaserJet 4MP from 1995 or 96, and my new Color LaserJet 1600 is built like a tank.  The problem is they're not consistent anymore.

Posted by: Pixy Misa at November 09, 2010 08:48 PM (PiXy!)

10 Yeah, that resonates. It used to be safe to recommend pretty much anything with an HP label on it; if it wasn't good, they wouldn't have released it in the first place. The first Color LaserJet was just...sad; within a few months we had a dozen color Tektronix Phasers, both solid ink and laser, and everyone loved them. The poor group who bought the HP had to suffer with it until it broke down out of warranty, and then they could finally get a Phaser.

-j

Posted by: J Greely at November 09, 2010 09:04 PM (2XtN5)

11

The stuff that we produced back then (both HP and Tek) was extremely high quality, but it also cost a fortune. For a while I worked in Tek's computer terminal group. This was in the days of the Tek 4014 terminal, the only terminal in the world at that time which could do 4000*3000 graphics, using a DVST (Direct View Storage Tube), a patented Tektronix technology. If you needed to do graphics like that, there was only one place you could go. And it was going to cost you about $14,000 each -- and that's 1975 dollars. In modern dollars it's more like about $25,000.

Tek sold them as fast as they could be made, but man, the price! And that was pretty much true for everything we made.

Not so much for HP, which did have consumer product groups even back then, but their stuff was top-drawer even in that market. You could buy a TI pocket calculator for $25 or an HP pocket calculator for $150, but the HP was notably superior, physically and in terms of function.

Modern HP, not so much. They're competing in commodity markets, and you can't charge a premium in those markets. Which means you can't afford to create the kind of quality HP used to be known for. It costs, and people won't pay.

Posted by: Steven Den Beste at November 09, 2010 09:09 PM (+rSRq)

12

Tek had an internal research group called "Tek labs" which wasn't directly involved in product development. They were doing more speculative research. Once a year they held a science fair, which engineers like me were invited to. The goal was to let us know what they were working on, partially in hopes that we'd go back to our development groups and look for ways to productize it.

I never saw anything I could use, but when I was reading J's post, it reminded me that I saw a research prototype of a color printer at the Tek Labs science fair. The prototype was huge, with clear rubber tubes through which different color inks ran, and it looked like a monstrosity, but the printing was decent.

Turning that one into a product was tough, but they did it.

Tek Labs was in building 51, along with the corporate HQ. I think that's because Howard Vollum liked to wander around engineering areas, back when he was still alive.

Posted by: Steven Den Beste at November 09, 2010 09:14 PM (+rSRq)

13 Before about 1995-ish, Compaq made excellent computers.

After that, not so much.

I won't wipe my nose on a Compaq now.

Posted by: atomic_fungus at November 10, 2010 01:28 AM (X50t/)

14 Is no one other than me wondering why J is licking weeks-old photographs?

Posted by: bkw at November 10, 2010 12:40 PM (34O+x)

15 Ah, you've never seen the sort of pictures I used to shoot in Los Angeles!

-j

Posted by: J Greely at November 10, 2010 01:02 PM (fpXGN)

16 OK, OK, enough's enough...

Posted by: Steven Den Beste at November 10, 2010 04:41 PM (+rSRq)

Hide Comments | Add Comment

Enclose all spoilers in spoiler tags:
      [spoiler]your spoiler here[/spoiler]
Spoilers which are not properly tagged will be ruthlessly deleted on sight.
Also, I hate unsolicited suggestions and advice. (Even when you think you're being funny.)

At Chizumatic, we take pride in being incomplete, incorrect, inconsistent, and unfair. We do all of them deliberately.

How to put links in your comment

Comments are disabled. Post is locked.
15kb generated in CPU 0.0079, elapsed 0.0254 seconds.
20 queries taking 0.0196 seconds, 33 records returned.
Powered by Minx 1.1.6c-pink.