September 19, 2010

NewEgg must be hungry

Last night I put in an order for two HD's with NewEgg. I received a shipment notification today, and I didn't even pay the "process it fast" bribe. Things must be pretty unbusy there.

I've been worried for a while about all the stuff I'm keeping on Deneb (the NAS), particularly all the fansubs I've downloaded in the last year. It's stored redundantly on Deneb itself, so if any one of the drives there goes out, I won't lose anything. But still, I don't have any kind of external backup.

So I got onto NewEgg a couple of days ago and saw that they had a special on 3 TB USB drives for $200. So I ordered two of them.

They will probably arrive on Thursday. I figure one is about right to hold an offline copy of the most important stuff. But at USB 2 speeds, it's going to take a painfully long time to copy it all.

There are two ways for me to do that. I can open the "from" folder and the new drive from here on Alcyone and copy one to the other, but that means all the data will have to pass twice over my LAN. (Yeah, that's what it does.)

Or I can open a remote desktop on Deneb and do the copy that way. If so, the data won't pass over my LAN and it should be faster. But Remote Desktop consumes an appalling amount of CPU time both on the server and on the terminal computer. Probably can't be helped. It's a good thing that Deneb is a dual-processor and Alcyone is a quad.

There are two volumes to copy. One is 919G and the other is 388G. At USB 2 speeds that ought to take about a month...

Folks, during my lifetime as a computer owner the cost of HD storage has declined by a factor of about a million. Back in the late 1970's, I paid about $200 for a 5MB SASI drive to connect to my Radio Shack Coco.

UPDATE: The drive will be plugged directly into the server, and it'll be the only USB device on the controller. So it's pretty much optimum for performance. NewEgg doesn't give a write speed, but I figure I'll be lucky to get 20 MB/s. So at that speed, it'd be eighteen and a half hours.

USB3 can't come soon enough! (Except that I'd have to buy all new equipment to take advantage of it.)

UPDATE: NO SUGGESTIONS, PLEASE.

Posted by: Steven Den Beste in Computers at 04:54 PM | Comments (17) | Add Comment
Post contains 422 words, total size 2 kb.

1 So I Googled "SASI".

Result #3:

"New SaSi Sex Toy Gets Intelligent With Your Nether Regions"

(O_O)

#7 was the definition I was looking for:  "Shugart Associates System Interface".

...been a damn long time since I heard the name "Shugart".

Posted by: atomic_fungus at September 19, 2010 07:30 PM (vKZ0t)

2

SASI was in its final throes when I bought mine, replaced shortly thereafter by SCSI and IDE.

Posted by: Steven Den Beste at September 19, 2010 07:51 PM (+rSRq)

3 Make a batch file to do the copy, and then use a terminal session just to set up a scheduler job to execute that batch file.  Then you won't have to have the terminal session open for the copy process.  I'd probably make a test script that copies just one or two files to figure out the process, then break it down to a few gigs per batch so you don't face any time-out issues.  But even with trial and error and setup, it should be way faster than any other reasonable option.

Posted by: David at September 19, 2010 08:05 PM (rlE2m)

4 Do I lose geek cred points for having never heard of a SASI drive?

Posted by: Wonderduck at September 19, 2010 08:15 PM (blg68)

5

David:

I hate unsolicited suggestions and advice.

Posted by: Steven Den Beste at September 19, 2010 08:15 PM (+rSRq)

6

Wonderduck: No, not really. SASI was never a very popular standard.

There was a guy I knew at the time who was a real fanatic about the OS-9 operating system. (Which had nothing to do with Apple; it was an Unix-alike designed for the Motorola 6809 microprocessor.)

He had designed a disk interface for his own 6809 system, and written a driver for it. He gave me that driver, and designed a disk interface for the Coco, which I built using wirewrap. (There's another of those terms that show how old and dusty I am.)

And the reason it used a SASI drive is that it's what he knew. Didn't make any difference to me either way, as long as it worked.

Posted by: Steven Den Beste at September 19, 2010 08:55 PM (+rSRq)

7 Wirewrap.  Good lord.  I did that a few times back in the day, though my little group of geeks knew it as 'spaghettiing.'

Posted by: Wonderduck at September 19, 2010 09:49 PM (blg68)

8 I remember OS-9 (I had a Coco 2).

Amazingly powerful OS for an 8-bit system.  And it's still around.

Posted by: Pixy Misa at September 20, 2010 12:33 AM (PiXy!)

9 I couldn't tell if you knew this or not, but USB3 is already here (except, as you point out, you'd have to buy new hardware.) I was doing some copying of about half a gig of stuff from a hard drive onto a second drive on the same PATA controller, and it was getting about 28MB/s. I remember reading something on a tech blog recently that if you turn off write caching, you might get up to 100MB/s. There are obvious drawbacks to that, however.

Posted by: RickC at September 20, 2010 07:54 AM (PyTVE)

10

Does that 3 TB USB drive also come with an eSATA port like the one on the back of your Acer Easystore?

Posted by: kderosa at September 21, 2010 01:50 PM (kFVgg)

11 No, it does not. There are only two connectors: a concentric power connector and a mini-USB connector.

Posted by: Steven Den Beste at September 21, 2010 02:04 PM (+rSRq)

12 That's a shame. eSATA would have given you USB3.0 speed.

Posted by: kderosa at September 21, 2010 02:18 PM (kFVgg)

13

I think the limiting factor is going to be the drive, in fact.

It's not like this is going to be something I do once a week. More like once every 6 months. A couple of hours one way or the other isn't really very important. And there's no way that a 1.3 TB copy is going to be quick, no matter how it's done.

Posted by: Steven Den Beste at September 21, 2010 02:29 PM (+rSRq)

14

You are right.  TB sized transfers are painful no matter what, even though eSATA/USB3 is noticeably quicker for such large transfers. If you are concerned about using CPU cycles uring remote desktop, just exit out of it after initiating the copy -- it will continue.

Posted by: kderosa at September 21, 2010 02:51 PM (kFVgg)

15

I'm not really worried about Remote Desktop. Again, if it were something I was doing weekly, it would be worthwhile to make some sort of effort to optimize. But for something that only happens a couple of times per year, I'll just put up with it.

And I don't suppose you noticed the part where I said I didn't want any suggestions, did you? (sob. How can I make it any more plain? Put it in big red letters over the top rotation picture?)

Posted by: Steven Den Beste at September 21, 2010 03:25 PM (+rSRq)

16 Sorry, Stephen, I did notice but I was trying to demonstrate the problem with your unsolicited advice/suggestion policy. For example, my first question was advice purposely disguised as an innocent question. Let's rephrase to clarify: If you want USB3 speed you might want to consider an eSATA drive that has both USB2 and eSATA ports since your EasyStore has an eSATA port and eSATA has about the same bandwidth as USB3. My last comment was actually a clarification of your statement that I purposely phrased in the form of advice, even though it technically wasn't. Again, let's rephrase to clarify: The appalling amount of CPU time expended using remote desktop can be helped simply by exiting out of the remote desktop session and permitting the file transfer to continue. The problem isn't that your requests not to make unwanted suggestions aren't sufficiently plain or noticeable (they are), the problem is that you are failing to recognize that statements such as: 1. "But Remote Desktop consumes an appalling amount of CPU time both on the server and on the terminal computer. Probably can't be helped," and 2. "USB3 can't come soon enough! (Except that I'd have to buy all new equipment to take advantage of it.)" are being viewed as invitations for advice by your readers in the context of the post. That's the reason why these "advice" incidents keep occurring with a comical frequency. And for you readers: phrase your advice in the form of comments/questions if you feel compelled to give advice and to avoid pissing off Stephen.

Posted by: kderosa at September 21, 2010 06:37 PM (kFVgg)

17

KDerosa, do you think I am stupid? I understand that often advice can be phrased as questions -- and I hate that, too. The reason I didn't blow up at you is because I'm trying to be a good host, even for bad guests who deliberately flaunt the rules.

This thread is now closed.

Posted by: Steven Den Beste at September 21, 2010 06:45 PM (+rSRq)

Hide Comments | Add Comment

Enclose all spoilers in spoiler tags:
      [spoiler]your spoiler here[/spoiler]
Spoilers which are not properly tagged will be ruthlessly deleted on sight.
Also, I hate unsolicited suggestions and advice. (Even when you think you're being funny.)

At Chizumatic, we take pride in being incomplete, incorrect, inconsistent, and unfair. We do all of them deliberately.

How to put links in your comment

Comments are disabled. Post is locked.
15kb generated in CPU 0.0115, elapsed 0.0273 seconds.
20 queries taking 0.0191 seconds, 34 records returned.
Powered by Minx 1.1.6c-pink.